Configure APF Firewall

A firewall is a very good idea for a server. Though many people think that a firewall is instant protection that will do everything it really is not. A firewall will help prevent some things but it is not going to stop everything. It is just one piece of the security network that is being woven. I recommend advanced protection firewall (APF) by rfxnetworks. APF will block unused outgoing and incoming ports. It can also be configured to use information from some block lists. The below port list will work for cPanel. For the other control panels you will need to add in the administration ports.

Download and Install APF Firewall.

--------------------------------------------------------------------------------cd cd/usr/local/src

wget http://rfxnetworks.com/downloads/apf-current.tar.gz

tar -zxf apf-current.tar.gz
cd apf-9.*

./install.sh
--------------------------------------------------------------------------------

Edit the file  conf.apf

pico -w /etc/apf/conf.apf

Scroll down to the "Common ingress (inbound) TCP ports section. At this point you need to find the correct configuration for your control panel.

@#@#@#@ cPanel @#@#@#@

IG_TCP_CPORTS="20,21,22,25,26,53,80,110,143,443,465,993,995,2082,2083,2086,2087,2095,2096"
IG_UDP_CPORTS="21,53,873"

EGF="1"
EG_TCP_CPORTS="21,22,25,26,27,37,43,53,80,110,113,443,465,873,2089"
EG_UDP_CPORTS="20,21,37,53,873"

@#@#@#@ Ensim @#@#@#@

IG_TCP_CPORTS="21,22,25,53,80,110,143,443,19638"
IG_UDP_CPORTS="53"

EGF="1"
EG_TCP_CPORTS="21,22,25,53,80,110,443"
EG_UDP_CPORTS="20,21,53"

@#@#@#@ Plesk @#@#@#@

IG_TCP_CPORTS="20,21,22,25,53,80,110,143,443,465,993,995,8443"
IG_UDP_CPORTS="37,53,873"

EGF="1"
EG_TCP_CPORTS="20,21,22,25,53,37,43,80,113,443,465,873,5224"
EG_UDP_CPORTS="53,873"

Save the file and start apf via.
-----------------------
apf -s
-----------------------

If everything still works then edit the config file and turn dev mode off. Make sure you can start a new ssh session before changing dev mode off. If you are kicked out you need to go back and look at what caused the problem!

DEVEL_MODE="0"

Restart APF
--------------
apf -r
--------------